1GE+1FE+CATV+WIFI XPON ONU HG623-TW

HG623-TW is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access. It is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. It adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. It is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps. It is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.It is designed by Realtek chipset 9602C.

SkypeEmail

Description

HZW-HG623-TW(HGU) is a XPON ONT terminal device,which designed for fulfilling FTTx and triple play service demand of fixed network operator . This box is based on the stable and mature Gigabit  technology, which has high ratio of performance to price, and the technology of Layer 2/3,WDM and high quality VoIP as well. It is highly reliable and easy to maintain, with guaranteed QoS for different service.  It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of XPON Equipment.

Feature

Supports Dual Mode (can access GPON/EPON OLT).

Supports GPON G.984/G.988 standards

Support CATV interface for Video Service and remote control by Major OLT

Support 802.11n WIFI (2×2 MIMO) function

Support NAT, Firewall function.

Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect

Support port mode of VLAN configuration

Support LAN IP and DHCP Server configuration

Support TR069 Remote Configuration and maintenance

Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode

Support IPv4/IPv6 dual stack

Support IGMP transparent/snooping/proxy

In compliant with IEEE802.3ah standard

Compatible with popular OLT (HW, ZTE, FiberHome…)

Specification

Technical Item

Details

PON interface

1 G/EPON port(EPON PX20+ and GPON Class B+)

Upstream: 1310nm; Downstream: 1490nm

SC/APC connector

Receiving sensitivity: ≤-27dBm

Transmitting optical power: 0~+4dBm

Transmission distance: 20KM

LAN interface

1x10/100/1000Mbps and 1x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

WIFI Interface

Compliant with IEEE802.11b/g/n

Operating frequency: 2.400-2.4835GHz

support MIMO, rate up to 300Mbps

2T2R,2 external antenna 5dBi

Support: Multiple SSID

Channel:13

Modulation type: DSSSCCK and OFDM

Encoding scheme: BPSKQPSK16QAM and 64QAM

CATV Interface

RF, optical power : +2~-18dBm

Optical reflection loss: 45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz,  RF output impedance: 75Ω

RF output level: 82dBuV-7dBm optical input

AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm

MER: 32dB(-14dBm optical input), 35(-10dBm)

LED

9 LED, For Status of WIFIWPSPWRLOSPONLAN1~LAN2WORNNORMAL(CATV)

Push-Button

4, for Function of Power on/off, Reset, WPS, WIFI

Operating condition

Temperature : 0+50

Humidity :10%90%non-condensing

Storing Condition

Temperature : -40℃+60

Humidity :10%90%non-condensing

Power supply

DC 12V/1A

Power Consumption

<6W

Net Weight

<0.4kg

Panel lights and Introduction

Pilot  Lamp

Status

Description

WIFI

On

The WIFI interface is up.

Blink

The WIFI interface is sending or/and receiving data (ACT).

Off

The WIFI interface is down.

WPS

Blink

The WIFI interface is securely establishing a connection.

Off The WIFI interface does not establish a secure connection.
PWR On The device is powered up.
Off The device is powered down.
LOS Blink The device doses not receive optical signals or with low signals.
Off The device has received optical signal.
PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
LAN1~LAN2 On Port (LANx) is connected properly (LINK).
Blink Port (LANx) is sending or/and receiving data (ACT).
Off Port (LANx) connection exception or not connected.
WORN

(CATV)OnInput optical power is higher than 2dBm or lower than -18dBmOffInput optical power is between -18dBm and 2dBmNormal

(CATV)OnInput optical power is between -18dBm and 2dBmOffInput optical power is higher than 2dBm or lower than -18dBm

 

Application

Typical SolutionFTTO(Office)FTTB(Building)FTTH(Home)

Typical ServiceBroadband Internet access, IPV, VOD, video surveillance, CATV etc.